⋅ 采用工件端面夹紧,有效防止薄壁工件的夹持变形。
⋅ 内部的补偿结构,夹持不规则端面的工件时可以自动调节。
⋅ 卡盘中心设置通孔,可装工件气密着座装置,也可进行空气喷射。
⋅ By clamping the end face of the workpiece, the clamping deformation of the thin-wallworkpiece can be effectively prevented.
⋅ The internal compensation structure can be adjusted automatically when the workpiece with irregular ends is clamped.
⋅ The center of the chuck is provided with a through hole, and the air tiht seat holder for the workpiece can be arranged,and air injection can also be carried out.
尺寸图 Size Fig
尺寸参数 Dimensions(mm)
规格 Spec | A | B | C(H6) | D | F | G | H | J | K | L1 | L2 | M1 | M2 | M3 | M4 | R | S | J | |
型号 Model | max | min | |||||||||||||||||
3ZX-08 | 165 | 86 | 140 | 104.8 | 45 | 70 | 50 | 14 | 28 | 21 | 15 | 36-56 | M16 | M10 | M10 | 3-M6 | 64 | 57.5 | 40 |
3ZX-06 | 210 | 90 | 170 | 133.4 | 56 | 75 | 55 | 16 | 38 | 20 | 18 | 50-70 | M20 | M12 | M12 | 3-M8 | 104 | 77.5 | 53.5 |
3ZX-10 | 254 | 95 | 220 | 171.4 | 70 | 50 | 24 | M16 | 6-M8 | 140 | 99.5 | 75.5 |
性能参数 Specifications
规格 Spec | 楔心行程 Piunger stroke(mm) | 爪行程(直径) Jaw stroke(mm) | 许用推拉力 Max.Pull force KN(kgf) | 最大夹紧力 Max. Gripping force KN(kgf) | 极限转速 Max. Speed (r/min) | 夹紧范围 Gripping range(mm) | 惯量 Moment of inertial (kg.m²) | 重量 Weight(kg) | 适用油缸 Matching cylinder | 最大使用压力 Max. pressure MPa(kgf/cm²) |
型号 Model | ||||||||||
3ZX-08 | 12 | 8 | 9(920) | 7.5(765) | 4000 | 55-79 | 0.05 | 12 | SY-100 | 1.2(12) |
3ZX-06 | 18(1835) | 16.5(1680) | 3500 | 75-106 | 0.14 | 23 | 2.5(25) | |||
3ZX-10 | 119-150 | 0.31 | 33 |