产品参数

· 注意事项:
卡盘夹紧或松开操作时，配气环上的两个特制密封圈箍紧缸体外圆，所以卡盘的松开和夹紧必须在机床主轴停止旋转时进行。

· CAUTION:
When clamping and releasing the chuck，the two special sealing rings on the valve ring block the cylinder outer circle.Therefore，the loosening and
clamping operations of the chuck must be carried out when the spindle of the machine stops rotating.

尺寸图  Size Fig

尺寸参数  Dimensions(mm)

性能参数  Specifications

注：1. 单爪行程=快速行程+夹紧行程，快速行程不能用于央紧。

2. 在气路中应配置减压阀、气液分离器、油雾器等气动元件，以提高卡盘寿命。

3. 卡盘的换向阀应选用中位泄压式三位五通双气控制阀，只有在泄压状态下才能旋转工作。

1.Single stroke== fast stroke+clamping stroke, fast stroke can not be used for clamping.
2.Pneumatic components such as pressure reducing valve, gas-liquid separator and oil sprayer shall be equipped in the gas path to improve the life of the chuck.
3.The valve should be a relief chuck three position five way double control valve selection, only in the state of pressure relief to work.