⋅ 适合在钻床、铣床、加工中心上使用。
⋅ 安装简单:单个安装只需配T型螺钉即可。
⋅ 群组安装:将数个夹盘安装于固定板上即可快速换模。
⋅ 软爪、硬爪可替换,节省成本。
⋅ Suitable for drilling,milling and Machining,center.
⋅ Simple installation:Asingle installation requires only-type screw
⋅ Group to Install:Install a number of chuck plates on the plate, You can quickly replactit.
⋅ Soft jaw and hardened jaw can be replaced to save cost.
尺寸图 Size Fig
尺寸参数 Dimensions(mm)
规格 Spec | A | B | C | D(H7) | D1 | E | F | G | H | I | Q | L | N(H7) | P |
型号 Model | ||||||||||||||
3KL-05 | 158 | 135 | 28 | 50 | 140 | 111 | 142 | 12 | 62 | 14 | 5 | 9 | 10 | 25 |
3KL-06 | 178 | 169 | 40 | 60 | 160 | 138 | 175 | 14 | 73 | 20 | 5 | 11 | 10 | 31 |
3KL-08 | 210 | 210 | 45 | 80 | 190 | 158 | 196 | 16 | 95 | 25 | 5 | 13 | 10 | 35 |
3KL-10 | 250 | 254 | 70 | 90 | 230 | 186 | 229 | 18 | 100 | 30 | 6 | 13 | 12 | 40 |
3KL-12 | 266 | 304 | 82 | 90 | 246 | 200 | 251 | 18 | 130 | 30 | 6 | 13 | 12 | 50 |
性能参数 Specifications
规格 Spec | 活塞面积 Eff. piston area (cm²) | 活塞行程 piston stroke (mm) | 爪行程(直径) Jaw stroke(mm) | 最大夹紧力 Max. Gripping force KN(kgf) | 最大使用压力 Max. pressure MPa(kgf/cm²) | 夹紧范围 Gripping range(mm) | 重量 Weight(kg) |
型号 Model | |||||||
3KL-05 | 46.7 | 10 | 5.4 | 35.8(3650) | 3.7(37) | 7-135 | 12 |
3KL-06 | 60.4 | 12 | 5.5 | 56.8(5800) | 3.6(36) | 12-168 | 20 |
3KL-08 | 98 | 16 | 7.4 | 85.8(8750) | 3.6(36) | 15-210 | 34 |
3KL-10 | 128.6 | 19 | 8.8 | 110.7(11300) | 3.4(34) | 31-254 | 56 |
3KL-12 | 155.3 | 23 | 10.6 | 143.6(14650) | 3.6(36) | 34-304 | 80 |
注:二爪立式夹盘的最大油压力应为三爪同规格所标最大油压力的三分之二。
The maximum oil pressure of the two-claw vertical chuck should be two thirds of the maximum oil pressure of the three claws.